Cover Installation - BRP Evinrude E-TEC G2 Service Manual

Engine Cover and Frame Service

Cover Installation

Cover Installation
Install the front cover. Install the upper screws
first. Tighten the screws 18 to 30 in. lbs. (2 to 3
N·m).
Apply Silicone Spray, P/N 775630, onto a shop
towel and liberally apply to the port and starboard
rubber seals.
1. Rubber seal
62
Install the port and starboard covers.
5009420_03-10
Tighten the port and starboard side cover screws
one-quarter turn.
1
5008559_19
Port Side Shown
5009420_03-09
5008559_08