Remote Control Configuration; Remote Control Identity; Fluid Level Configuration - BRP Evinrude E-TEC G2 Service Manual

Remote Control Configuration

Select the Config button to make remote control
configurations changes or calibrate the remote
control lever(s).
After making setting selections, be sure to press
the Save Changes button.
To calibrate the remote control lever(s), press the
Initiate button to start the procedure.
Following the on-screen prompts, move the con-
trol lever to the directed position, then press the
Set Position button.
1
Remote Control Configuration Screen
1. Save Changes button
2. Initiate calibration button
3. Set Position button
Evinrude ICON II Remote Control System

Remote Control Identity

Select the Identification button to view identifica-
tion information.
Remote Control Identity Screen

Fluid Level Configuration

2 3
Select the Fluid Levels button to configure fuel or
oil level sensors connected to the remote control
network.
After making selections, be sure to press the Save
Configuration button for the selected fluid chan-
nel.
009385
Remote Control Fluid Levels Configuration Screen
1. Save Configuration button
If equipped, fluid levels can also be configured
using an Evinrude ICON Touch digital display. See
the User's Guide for the digital display.
System Settings and Diagnostics
1
009389
10
009386
229