BRP Evinrude E-TEC G2 Service Manual page 87

The EMM monitors shift calibration. If the FOR-
WARD or REVERSE calibration exceeds the lim-
its saved in the EMM, the EMM:
Activates SHUTDOWN
Stores fault code 199
Engine Monitor: CHECK ENGINE display ON
The EMM monitors the ESC driver current. If the
current exceeds 50 A, the EMM:
Activates SHUTDOWN
Stores fault code 200
Engine Monitor: CHECK ENGINE display ON
The EMM monitors the ESC motor circuit.
If the EMM detects the ESC motor circuit is
OPEN, the EMM:
Activates SHUTDOWN
Stores fault code 203
Engine Monitor: CHECK ENGINE display ON
If ESC motor current exceeds 8 A when moving
into NEUTRAL, the EMM:
Activates SHUTDOWN
Stores fault code 207
Engine Monitor: CHECK ENGINE display ON
Engine and Control Systems
Throttle, Shift and Steering Control Systems
4
87