Crankcase Disassembly; Cylinder Head Removal - BRP Evinrude E-TEC G2 Service Manual

Crankcase Disassembly

Remove crankcase flange screws.
Loosen in stages, and remove the main bearing
screws and nuts.
Separate crankcase and cylinder block. It may be
necessary to tap on crankshaft with a rawhide or
rubber mallet to loosen.
Carefully remove the crankcase from the cylinder
block to avoid damaging the crankshaft seal rings.
009668

Cylinder Head Removal

Loosen in stages and remove 8 cylinder head
retaining nuts.
1
009669
1. 8 cylinder head retaining nuts
Loosen in stages and remove 12 cylinder head
retaining screws. Remove the cylinder head.
1
009692
1. 12 cylinder head retaining screws
Powerhead
Powerhead Disassembly
009689
009681
009681
245
11