Remote Control Monitor; Remote Control Faults; Remote Control Software - BRP Evinrude E-TEC G2 Service Manual

Evinrude ICON II Remote Control System
System Settings and Diagnostics

Remote Control Monitor

Select the Monitor button to view certain power
faults and remote control functions. On-screen
indicators will illuminate when the related function
on the remote control is activated.
Remote Control Monitor Screen

Remote Control Faults

Select the Faults button to view any remote con-
trol fault codes.
Remote Control Faults Screen
230
ICON II System NEUTRAL Idle Mode
The following conditions will cause the ICON II
system to enter NEUTRAL idle mode:
•
Remote control lever sensor failure
•
Foot throttle sensor failure
•
Loss of communication with the EMM
The EMM:
Activates NEUTRAL idle mode
Stores remote control fault code between
1 and 12; or, 21, 24, 27, or 30.
Engine Monitor: CHECK ENGINE display ON

Remote Control Software

Select the Software button to upload software to
the remote control. Press the Load Software but-
ton and follow the on-screen prompts.
009388
Remote Control Software Screen
009387
009390