Stern and Swivel
DPS Manifold Service
Top of DPS Manifold
1. Screw
Carefully separate the manifolds.
320
Remove the tube and o-rings from the bottom of
the DPS manifold. Then remove the filter.
1
1
009455
1. Tube and o-rings
2. Filter
Clean and dry all parts thoroughly.
Assembly
Install a new filter into the manifold. Apply a drop
of Power Trim/Tilt Fluid, P/N 767969, to the
o-rings of a new tube and o-ring assembly. Install
the tube and o-rings into the manifold.
1
009456
1. Filter
2. Tube and o-rings
2
2
009457
009461