Shift Housing Removal; Water Intake Screens; Shifter, Bearing And Seal Servicing; Shift Housing Disassembly - BRP Evinrude E-TEC G2 Service Manual

Shift Housing Removal

Refer to Shift Housing Removal on p. 379.

Water Intake Screens

Remove and clean side water intake screens.
Replace if damaged.
1
1. Water intake screen

Shifter, Bearing and Seal Servicing

Shifter, Bearing and Seal
Servicing

Shift Housing Disassembly

Wear safety glasses to avoid injury.
IMPORTANT:
serviced as an assembly. If either are worn or dam-
aged, replace the complete assembly.
If the reverse gear came out with the clutch shaft,
remove the cradle and gear from the clutch shaft.
009587
1
1. Clutch dog spring
Insert a suitable tool under one end of the clutch
dog spring and remove it from its groove by
unwrapping it from around the clutch dog. Dis-
card the spring.
1. Clutch dog spring
Gearcase
WARNING
The shift housing and bearing are
1
009558
009520
14
401