Frame Removal; Starboard, Port, And Front Frame Removal - BRP Evinrude E-TEC G2 Service Manual

Engine Cover and Frame Service

Frame Removal

Frame Removal
Starboard, Port, and Front Frame
Removal
Use a #2 Posi-drive screwdriver to remove two
self-tapping screws which retain the gearcase oil
reservoir.
Remove the 17 starboard frame screws.
Pull the starboard frame slightly away from the
center frame.
64
Disconnect the trim and tilt switch connector.
Remove the two Deutsch connectors from their
protective caps.
1
1. Trim and Tilt connector
2. Protective caps
Remove the starboard frame and lower exhaust
5008559_12A
housing cover.
5008559_12
2
2
5008559_17
5008559_16