Steering Pressure Sensors - BRP Evinrude E-TEC G2 Service Manual

Align the sleeves, and tube and o-rings of the
DPS manifold with the screw bosses, and fluid
passage of the trim manifold.
2
1
3
4
1. Sleeves
2. Tube and o-rings
3. Retaining screw bosses
4. Fluid passage
Assemble the manifolds.:
•
Install two screws and washers from the bottom
of the trim manifold
•
Install one screw from the top of the DPS mani-
fold
Bottom Of Trim Manifold
1. Two screws and washers
1
3
009462
1
1
009454
Top of DPS Manifold
1. Screw
Tighten the screws to a torque of 60 to 84 In. lbs.
(7 to 10 N·m).

Steering Pressure Sensors

Remove the steering pressure sensors as
required for replacement.
1. Steering pressure sensors
Install sensors and tighten to a torque of 144 to
168 In. lbs. (17 to 19 N·m).
Stern and Swivel
DPS Manifold Service
1
009455
1
1
009458
321
13