Exhaust Relief Muffler Assembly - BRP Evinrude E-TEC G2 Service Manual

Exhaust Housing & Adapter
Exhaust Housing Service

Exhaust Relief Muffler Assembly

The exhaust relief muffler is located at the rear of
the adapter housing and concealed by the engine
covers and frames.
1
1. Exhaust relief
The exhaust relief grommet connects directly to
the muffler assembly. The muffler assembly con-
nects to the exhaust relief hose from the exhaust
pipe.
2
1
3
1. Exhaust relief grommet
2. Muffler assembly
3. Exhaust relief hose
4. Exhaust pipe
292
009355
4
009356
The overboard indicator and flush port in the
exhaust relief grommet connect to a water hose.
A tee-fitting distributes water to two hoses. One
hose supplies flushing water to the vapor separa-
tor, EMM and DPS module and exits into the
exhaust adapter. A second hose supplies flushing
water to a fitting at the top of the block. Refer to
Cooling Hose Diagrams starting on p. 212.
2
1
1. Overboard indicator and flush port
2. Water hose
3. Tee fitting
Periodically inspect hoses and connections for
condition. Replace muffler or hoses as needed.
3
009356