Show All ARP Entry Information
92
G8264CS Command Reference for ENOS 8.4
The following command displays ARP information:
show [ip] arp
Command mode: All
Mgmt ARP entries:
Total number of Mgmt ARP entries : 3
IP address Flags MAC address VLAN Age Port
10.241.38.131 P 74:99:75:74:c4:fe 4095 MGT
10.241.38.132 74:99:75:75:69:fe 4095 71 MGT
10.241.38.254 74:99:75:c8:13:00 4095 35 MGT
Data ARP entries:
Current ARP configuration:
rearp 5
No static ARP configured.
Total number data ARP entries : 10
IP address Flags MAC address VLAN Age Port
1.1.1.4 P 74:99:75:74:c4:00 100
1.1.1.5 74:99:75:75:69:00 100 140 TRK64
1.1.1.10 P 00:00:5e:00:01:01 100
2.2.2.4 P 74:99:75:74:c4:00 200
2.2.2.5 74:99:75:75:69:00 200 141 TRK64
2.2.2.6 74:99:75:08:99:00 200 140 TRK1
2.2.2.10 P 00:00:5e:00:01:01 200
3.3.3.4 P 74:99:75:74:c4:00 300
3.3.3.6 74:99:75:08:99:00 300 150 TRK1
3.3.3.10 P 00:00:5e:00:01:01 300
The Port field shows the target port of the ARP entry.
The Flags field is interpreted as follows:
Table 42.
ARP Flag Parameters
Flag
Description
P
Permanent entry created for switch IP interface.
R
Indirect route entry.
U
Unresolved ARP entry. The MAC address has not been learned.