Port Link Led Is Not Lit - Lenovo ThinkSystem NE1032 Installation Manual

Port Link LED Is Not Lit

© Copyright Lenovo 2018
Symptom: The port link LED is not lit.
Solution 1: Check the port configuration in the firmware (see the Command
Reference). If the port is configured with a specific speed or duplex mode, check the
other device to make sure that it is set to the same configuration. If the switch port is
set to auto-negotiate, make sure that the other device is set to auto-negotiate.
Solution 2: Check the cables that connect the port to the other device. Make sure
that they are connected correctly. Make sure that you are using the correct cable
type.
Chapter 6: Troubleshooting
89