Virtual Nic (Vnic) Information Commands - Lenovo RackSwitch G8264CS Cli Command Reference

Virtual NIC (vNIC) Information Commands
© Copyright Lenovo 2017
The following commands display information about Virtual NICs (vNICs).
Table 73.
vNIC Information Options
Command Syntax and Usage
show vnic
Displays the current vNIC settings. For a sample output, see page
Command mode: All
show vnic vnic [all]
Displays information about each vNIC. The all option displays information
about all the vNICs. For a sample output, see page
Command mode: All
show vnic vnicgroup [<1‐32>]
Displays information about each vNIC Group, including:
Status (enabled or disabled)

VLAN assigned to the vNIC Group

Uplink Failover status (enabled or disabled)

Link status for each vNIC (up, down or disabled)

Port link status for each port associated with the vNIC Group (up, down or

disabled)
For a sample output, see page
Command mode: All
show vnic information­dump
Displays all vNIC information.
Command mode: All
166,
167.
Chapter 2: Information Commands
166.
165