YASKAWA iQpump1000 User Manual page 136

4.2 Powering Up the Drive
The "Clock Not Set" display will appear if the Real-Time Clock data is not entered within 30
1
seconds of power-up of a drive with an HOA operator that has not yet been set.
Use the up and down arrow keys to scroll through display menu until the screen shows
2
"Programming".
3 Press the ENTER key to enter select the parameter setting mode.
4 Use the up and down arrow keys to scroll through display menu until parameter o4-17 appears.
5 Press the ENTER key until "0" flashes.
6 Press the up arrow key so that the display changes to "1".
Press the ENTER key and the time setting screen will appear. Use the right arrow key to select
7
the desired digit, then set the correct date and time using the up and down arrow keys.
After entering the correct time, press the ENTER key to save the changes.
8
The display will return to the display shown in step 5 and the alarm LED will be OFF.
n o4-17: Real-Time Clock Setting (Resetting RTC to Factory Default)
No.
(Addr. Name
Hex)
o4-17
Set/Reset Real-time Clock
(3100)
136
Table 4.2 Manual Clock Adjustment Procedure by Setting o4-17 to 1
Procedure
Sets the current date and time for the Real-Time Clock.
0: — — No Setting
1: Real-Time Clock Set
2: Real-Time Clock Reset
Description
YASKAWA TOEP YAIP1W 01F YASKAWA AC Drive - iQpump1000 User Manual
Display
ALM ALM
- MODE - DRV Rdy
Clock Not Set
Press F2 to Set
FWD
DATA
ALM
- MODE - PRG
Programming
FWD
HOME
ALM ALM
- PRMSET - PRG
Initialization
A1-00 = 0
Select Language
HOME FWD DATA
ALM ALM
- PRMSET - PRG
Maintenance
o4-17 = 0
Set time
HOME FWD
DATA
ALM ALM
- PRMSET - PRG
Set time
o4-17= 0 *0*
- -
"0"
FWD
HOME DATA
ALM ALM
- PRMSET - PRG
Set time
o4-17= 1 *0*
Set
"0"
HOME FWD DATA
ALM ALM
YYYY/MM/DD HH:MM
20 1 0/01/01 00:00
Second per month
+ 0 sec
ALM
Entry accepted
Values
Default: 0
Range: 0 to 2