YASKAWA iQpump1000 User Manual page 421

No.
(Addr. Name
Hex)
P9-50 Water Level/Suction
(0E25) Pressure Source
Low Water Level/
P9-51
Suction Pressure Turn-
(0E26)
Off Method
P9-60 Geothermal
(0E2F) Temperature Source
P9-98
Network Parameter
(0E55)
Push Selection
<4>
P9-99 Network Compatibility
(0E56) Selection
<1> Unit is determined by P1-02, System Units, setting.
<2> Default is 0 s in drive software versions PRG: 8553 and earlier.
<3> Available in drive software versions PRG: 8551 and later.
<4> Available in drive software versions PRG: 8552 and later. Not available in drive models 4A0930 and 4A1200.
<5> Resolution is set by P6-22, Flow Meter Decimal Place Position.
<6> Default is 0 in drive software versions PRG: 8553 and earlier.
YASKAWA TOEP YAIP1W 01F YASKAWA AC Drive - iQpump1000 User Manual
LCD Display
Sets the signal to use for Water Level Control (Q4-oo),
Suction Pressure Control (Q5-oo), or PI Aux Control (Q6-
WL/SP/PI-Aux Src
oo) when P1-01, Pump Mode, is set to 3 (MEMOBUS
0: Analog only
network).
1: Ana->Net, No Alrm
0: Analog only
2: Ana->Net, Alarm
1: Ana->Net, No Alrm
3: Network only
2: Ana->Net, Alarm
3: Network only
Determines whether drives will respond to Water Level, Suction
Low WL/SP/PI-Aux Pressure, or PI Aux Control transducer feedback over the
0: Continue Running MEMOBUS network.
1: Turn-off 0: Continue Running
1: Turn off
Geo Temp Source 0: Analog only
0: Analog only 1: Ana->Net, No Alrm
1: Ana->Net, No Alrm 2: Ana->Net, Alarm
2: Ana->Net, Alarm 3: Network only
3: Network only
Selects how system-wide parameters are pushed to the
NetParameterPush
MEMOBUS/Modbus Multiplex network.
0: Disabled
0: Disabled
1: Enabled/Prompt
1: Enabled/Prompt
Determines the communication compatibility for the iQPump
Network Comp Sel
MEMOBUS network.
0: A-Ver: 30034
0: A-Ver: 30034
1: B-Ver: 30035/36
1: B-Ver: 30035/36
2: iQ SmartNetwork
2: iQ SmartNetwork
B.12 P: Pump Parameters
Description Values Page
Default: 0
–
Range: 0 to 3
Default: 0
–
Range: 0, 1
Default: 0
–
Range: 0 to 3
Default: 1
<6>
–
Range: 0, 1
Default: 2
–
Range: 0 to 2
B
421