YASKAWA iQpump1000 User Manual page 156

4.6 iQpump Presets and Functions
13.
The pump can be run in HAND (LOCAL) Mode for maintenance purposes by pressing the HAND key while the drive
is stopped. The HAND key acts as a start button. Press the OFF button to stop the drive. Press AUTO to return the
drive to geothermal control. The HAND speed reference can be set in P5-02 (Hand Reference 1). Disable the HAND
key by setting P5-04 to 0 (disabled).
n Related Parameters, Faults, and Alarms
No.
A1-01 Access Level Selection
A1-03 Initialize Parameters
b1-02 Run Command Selection 1
E2-01 Motor Rated Current
E2-04 Number of Motor Poles
P1-03 Feedback Device Scaling
P1-04 Start / Draw Down Level
P1-06 Minimum Pump Speed
P1-11 High Feedback Level
P2-02 Sleep Level
P4-10 AUTO Mode Operator Run Power Down Storage
P5-02 HAND Speed Reference 1
P5-04 HAND Key Function Selection
Q1-01 PID Controller Setpoint 1
Q2-01 Minimum Geothermal Temperature Input
Q2-02 Maximum Geothermal Temperature Input
Q2-03 Minimum Geothermal Speed
Q2-04 Maximum Geothermal Speed
156
Parameter Name
YASKAWA TOEP YAIP1W 01F YASKAWA AC Drive - iQpump1000 User Manual
Setting Values
Default: 2
Range: 0 to 3
Default: 0
Range: 0 to 5550; 6008 to 6014; 7770, 7771
Default: 0
Range: 0 to 3; 6 to 8
Default:
Min.: 10% of drive rated current
Max.: 200% of drive rated current
Default: 2
Min.: 2
Max.: 48
Default: 145.0 PSI
Min.: 0.1
Max.: 6000.0
Default: 0.0
Min.: -999.9
Max.: 999.9
Default: 40.0 Hz
Min.: 0.0
Max.: [E1-04]
Default: 0.0 PSI
Min.: 0.0
Max.: 6000.0
Default: 0.0 Hz
Min.: 0.0
Max.: 6000.0
Default: 0
Range: 0, 1
Default: 40.0 Hz
Min.: 0
Max.: [E1-04]
Default: 1
Range: 0, 1
Default: 0.0
Min.: 0.0
Max.: 6000.0
Default: 0.0 °F
Min.: -110.0
Max.: 275.0
Default: 120.0 °F
Min.: -100.0
Max.: 275.0
Default: 40.0 Hz
Min.: 0.0
Max.: 400.0
Default: 60.0 Hz
Min.: 0.0
Max.: 400.0