YASKAWA iQpump1000 User Manual page 432

B.14 S: Special Application
No.
(Addr. Name
Hex)
S2-05 Sequence Timer 1
(320A) Reference Source
S2-06 Sequence Timer 2 Start
(320B) Time
S2-07 Sequence Timer 2 Stop
(320C) Time
S2-08 Sequence Timer 2 Day
(320D) Selection
S2-09 Sequence Timer 2
(320E) Selection
S2-10 Sequence Timer 2
(320F) Reference Source
S2-11 Sequence Timer 3 Start
(3210) Time
S2-12 Sequence Timer 3 Stop
(3211) Time
432
LCD Display
Tmr 1 Ref Source
0: Operator (d1-01/ Selects the frequency reference source used for running the
Q1-01) drive when sequence timer 1 is active (only applicable when
0: Operator (d1-02/ S2-04 is set to 1 or 2).
Q1-02) 0: Operator (d1-01/Q1-01)
0: Operator (d1-03/ 1: Operator (d1-02/Q1-02)
Q1-03) 2: Operator (d1-03/Q1-03)
0: Operator (d1-04/ 3: Operator (d1-04/Q1-04)
Q1-04) 4: Terminals
4: Terminals 5: Serial communication
5: Serial com 6: Option card
6: Option PCB 7: Pulse input
7: Pulse Input 8: Set by b1-01
8: Set by b1-01
Sets the start time for timer 2.
Note:
Tmr 2 Start Time
Sets the stop time for timer 2.
Note:
Tmr 2 Stop Time
Tmr 2 Day Sel Sets the days for which sequence timer 2 is active.
0: Timer Disabled 0: Timer disabled
1: Daily 1: Daily
2: Mon - Fri 2: Mon - Fri
3: Sat - Sun 3: Sat - Sun
4: Monday 4: Monday
5: Tuesday 5: Tuesday
6: Wednesday 6: Wednesday
7: Thursday 7: Thursday
8: Friday 8: Friday
9: Saturday 9: Saturday
10: Sunday 10: Sunday
Sets the action that occurs when sequence timer 2 is active.
Tmr 2 Seq Sel
0: Digital output only
0: Digital Out Only
1: Run
1: Run
2: Run - PI disable
2: Run - PI Disable
3: AllowAlternation
3: Allow Alternation
Selects the frequency reference source used for running the
Tmr 2 Ref Source drive when sequence timer 2 is active (only applicable when
0: Operator (d1-01) S2-09 is set to 1 or 2).
1: Operator (d1-02) 0: Operator (d1-01/Q1-01)
2: Operator (d1-03) 1: Operator (d1-02/Q1-02)
3: Operator (d1-04) 2: Operator (d1-03/Q1-03)
4: Terminals 3: Operator (d1-04/Q1-04)
5: Serial Com 4: Terminals
6: Option PCB 5: Serial communication
7: Pulse Input 6: Option card
8: Set by b1-01 7: Pulse input
8: Set by b1-01
Sets the start time for timer 3.
Note:
Tmr 3 Start Time
Sets the stop time for timer 3.
Note:
Tmr 3 Stop Time
Description
The value must be set less than or equal to S2-07
in drive software versions PRG: 8551 and earlier.
The value must be set greater than or equal to
S2-06 in drive software versions PRG: 8551 and
earlier.
<2>
The value must be set less than or equal to S2-12
in drive software versions PRG: 8551 and earlier.
The value must be set greater than or equal to
S2-11 in drive software versions PRG: 8551 and
earlier.
YASKAWA TOEP YAIP1W 01F YASKAWA AC Drive - iQpump1000 User Manual
Values Page
Default: 8
–
Range: 0 to 8
Default:
<3>
12:00AM
Min.: 12:00AM
–
Max.: 11:59PM
<1>
Default:
<3>
12:00AM
Min.: 12:00AM
–
Max.: 11:59PM
<1>
Default: 0
–
Range: 0 to 10
Default: 0
245
Range: 0 to 3
Default: 8
–
Range: 0 to 8
Default:
<3>
12:00AM
Min.: 12:00AM
–
Max.: 11:59PM
<1>
Default:
<3>
12:00AM
Min.: 12:00AM
–
Max.: 11:59PM
<1>