YASKAWA iQpump1000 User Manual page 478

C.9 MEMOBUS/Modbus Data Table
Register No.
oFC1x Contents (CN5-C)
bit 0
bit 1
bit 2
bit 3
00E2H
bit 4
bit 5
bit 6
bit 7
bit 8 to F
00E3H, 00E4H Reserved
oFC3x Contents (CN5-C)
bit 0
bit 1
bit 2
bit 3
bit 4
bit 5
bit 6
00E5H
bit 7
bit 8
bit 9
bit A
bit B
bit C
bit D
bit E, F
00E6H to 00FFH Reserved
<1> Parameter o1-03, Digital Operator Display Selection, determines the units.
<2> Display is in the following units:
2A0004 to 2A0040, 4A0002 to 4A0023, and 5A0007 to 5A0017: 0.01 A units.
2A0056 to 2A0415, 4A0031 to 4A0675, and 5A0022 to 5A0242: 0.1 A units.
4A0930 and 4A1200: 1 A units.
<3> Communication error contents are saved until the fault is reset.
<4> Set the number of motor poles to parameter E2-04.
478
Contents
Option RAM Fault (oFC10)
Option Operation Mode Fault (SLMOD) (oFC11)
Drive Receive CRC Error (oFC12)
Drive Receive Frame Error (oFC13)
Drive Receive Abort Error (oFC14)
Option Receive CRC Error (oFC15)
Option Receive Frame Error (oFC16)
Option Receive Abort Error (oFC17)
Reserved
Comm. ID Error (oFC30)
Model Code Error (oFC31)
Sumcheck Error (oFC32)
Comm. option timeout waiting for response (oFC33)
MEMOBUS Timeout (oFC34)
Drive timeout waiting for response (oFC35)
CI Check Error (oFC36)
Drive timeout waiting for response (oFC37)
Control Command Selection Error (oFC38)
Drive timeout waiting for response (oFC39)
Control Response Selection 1 Error (oFC40)
Drive timeout waiting for response (oFC41)
Control Response Selection 2 Error (oFC42)
Control Response Selection Error (oFC43)
Reserved
YASKAWA TOEP YAIP1W 01F YASKAWA AC Drive - iQpump1000 User Manual