Reset - Renesas M16C Series User Manual

M30240 Group

1.2.5 Reset

There are two types of resets: hardware and software. In both cases, operation is the same after the
reset.
1.2.5.1 Hardware reset
When the supply voltage is within the range where operation is guaranteed, a reset is effected by hold-
ing the reset pin level "L" (0.2Vcc max.) for at least 20 f(X
returned to the "H" level while main clock is stable, the reset status is cancelled and program execution
resumes from the address in the reset vector table.
Figure 1.9 shows an example of a reset circuit. Figure 1.10 shows the reset sequence.
.
Figure 1.9: Reset circuit
X
IN
RESET
Internal clock Φ
Address
Figure 1.10: Reset sequence
When the RESET pin level = "L", all ports change to input mode (floating.) Table 1.4 shows the status
of the other pins while the RESET pin level is "L".
Table 1.4: Pin status when RESET pin level is "L"
P6, P7, P8
0
Rev.1.00 Sep 24, 2003 Page 21 of 360
V
V
RESET CC
RESET
Example when V = 5V
CC
At least 20 cycles are needed
Internal clock Φ
24 cycles
Pin name
P0
P1
P2, P3
to P8 , P8 , P8 , P10
4 6 7
) cycles. When the reset pin level is then
IN
5V
4.0V
CC
0V
5V
0.8V
0V
FFFFC Content of reset vector
16
FFFFE
16
Input port (floating)
Input port (floating)
Input port (floating)
Input port (floating)
Status
Reset