Page 1
After the installation the machine’s site code will be shown, this is not important at this stage, click <Next> then <Finish>. The Auto-update dialog box will be launched. Configure the Auto-update settings dialog to allow the installation to be checked for available updates. Renesas Starter Kit for M16C/29 D006174_11_S01_V04...
Page 2
In the “Welcome” dialog box: Verify “Create New Workspace” is selected. Click <OK> In the “New Project Workspace” dialog box: Set the “CPU Family” to “M16C”, and verify the “Tool chain” is set to “Renesas M16C Standard” .Select “E8A_RSKM16C29” from the left hand pane.
Page 3
Click <Finish>. Note: The first time the E8a is connected, you may be asked to choose a driver, select “Renesas Communications”, after a few seconds the “Interface” and “Channel” numbers will be automatically displayed, click <Close> on the dialog. Accept any dialog warning that another version of E8a firmware is necessary to work with the application. Allow download of firmware to complete, this may take several seconds.
Page 4
(Project > Insert Project) from the main menu. The tutorials will help you understand the device and development process using Renesas Development Tools. The Hardware manual supplied with this RSK is current at the time of publication. Please check for any updates to the device manual from the Renesas internet site at: www.renesas.com/renesas_starter_kits...