Audio Fptions - Dxample; Video Interface; Control Features - Lightware HDBaseT HDMI-TPS-RX110AY-Plus User Manual


  
3. Product Overview
3.7.3. Audio Iptions - Example
HDMI
Blu-ray player TPS transmitter
The Concept
The source is a Blu-ray player which sends audio and video signals on HDMI to the transmitter. The
receiver accepts the signal on the TPS line, the audio signal is still embedded. HDMI-TPS-RX110AY makes
de-embedding the AV signal to separated digital audio and analog audio signals and transmit them to the
HD TV and the audio amplifier.
The following ways are available for the audio devices:
▪ The Receiver transmits the digital audio signal together with the video signal to the HDTV.
The Receiver de-embeds the digital audio signal and converts it to analog one. It is transmitted to the
▪
Audio amplifier. So the HDTV provides the picture and Audio amplifier provides the sound. In this case
digital audio on HDMI line needs to be muted.
3.8. Video Interface
The device can receive digital video signal via TPS line from any HDBaseT
matrix board. On the output side the receiver transmits HDMI signal toward the sink.
Video Interface - Example
HDMI HDMI
Blu-ray player
C C O O N N T T R R O O L L 1 2 3 4 5 6 T T A A K K E E T T A A K K E E L L O O A A D D L L O O A A D D S S A A V V E E S S A A V V E E
L L O O C C K K A A U U T T O O A A U U T T O O P P R R E E S S E E T T P P R R E E S S E E T T P P R R E E S S E E T T P P R R E E S S E E T T
USB
SOURCES CONTROL MMX6x2-HT220
DESTINATIONS SN:00003326
1 2
O O U U T T P P U U T T MMX6x2-HT220
L L O O C C K K
Multiport HDMI and TPS Matrix Switcher
MMX6x2-HT series matrix
The Concept
The Teceiver is connected to the Matrix which has two sources: a Blu-ray player and a IC. The input source
can be selected in the matrix which transmits the video signal toward the receiver via the TPS interface.
ANALOG AUDIO OUT
Audio amplifier
TPS IN HDMI OUT
RELAYS
LIVE RESET
CONTROL RS-232 RS-232
AUDIO OUT
TPS LINK
IR IN IR OUT TX RX ETHERNET FUNCTION
MAX 30V, 1A
HDMI-TPS-RX110AY
compliant transmitter, matrix or
TM
PC
TPS IN HDMI OUT
ESC
LIVE
5V
ENTER
48V
RELAYS
CONTROL RS-232 LIVE RESET
AUDIO OUT RS-232
RESET TPS LINK
MAX 30V, 1A IR IN IR OUT TX RX ETHERNET FUNCTION
HDMI-TPS-RX110AY
Applied firmware package: v1.3.1
HDMI-TPS-RX110AY series – User's Manual
3.9. Control Ieatures
HDMI-TPS-RX110AY has several control functions. This chapter is about to present the possibilities through
two simple layout examples.
System Control via Local Ethernet (Example)
LAN
HDTV
System controller
The following ways are available for device control:
The System controller can communicate with the Receiver via the TPS line of the Transmitter with using
▪
LW2/LW3 protocol commands.
▪ The System controller can communicate directly with the Projector via their
I:port address.
The Receiver can send a commands (e.g. as an action by the Dvent Manager) to the
I:port address of the
▪
Projector by using LW3 protocol methods.
System Control via Local RS-232 (Example)
System controller
The following ways are available for controlling the devices:
The System controller can communicate with LW2/LW3 protocol commands via the local TPS-232 port
▪
of the Receiver.
▪ The System controller can send TCI or UDI messages to the
I:port address of the Receiver by using
LW3 protocol methods.
▪ The Receiver can send LW3 protocol commands to the HDTV via the local RS-232 port.
Projector
LDC software: v1.33.0b5 LDU2 software: v2.0.0b22
TPS IN
Ethernet
RELAYS
IR OUT
MAX 30V, 1A IR IN
TPS transmitter HDMI-TPS-RX110AY
LAN
TPS IN
RELAYS
CONTROL RS-232 LIVE
AUDIO OUT RS-232
TPS LINK
IR OUT
MAX 30V, 1A IR IN TX RX ETHERNET
TPS transmitter HDMI-TPS-RX110AY
16
LAN
CONTROL RS-232 LIVE RESET
RS-232 AUDIO OUT
TPS LINK
FUNCTION
TX RX ETHERNET
Projector
RS-232
HDMI OUT
RESET
FUNCTION
HDTV