Ubex Concept; Video Interface; Transmitter Mode - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     

4. UBEX Concept

4. UBEX Concept
4
U BEX Concept
The following chapter describes the features of the device with few real-life
examples. The topics that are described:
ç Video Interface
ç Audio Interface
ç Ethernet Control Interface
ç Serial Interface
ç Infrared Interface
ç SFP+ Interface
ç Redundant Fiber Optical Connections
ç Further Built-in Features
ç Software Control Modes
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
4.1. Video Interface
4.1.1. Transmitter Mode
Port Diagram
The port diagram is valid for the following UBEX endpoint models:
▪ UBEX-PRO20-HDMI-F100
▪ UBEX-PRO20-HDMI-F110
▪ UBEX-PRO20-HDMI-R100 series
Video port diagram of the F100/F110/R100 transmitter
HDMI Input Modes
The transmitter can receive HDMI video streams from two HDMI 2.0
input ports. The signals can be up to 4K@60 Hz 4:4:4 in the case of
both inputs.
The video streams of the HDMI inputs can be processed in the video
processors. The processor of the HDMI in 1 has video scaler, frame rate
converter (FRC), and color space converter (CSC) functions. The processor
of the HDMI in 2 has frame rate converter and color space converter
functions.
The scaler settings are available in the LCD menu (see the details in
the TX HDMI Input 1 and 2 Ports
(see the details in the
the frame rate converter settings (FRC) are available in the LCD menu
(see the details in the
LDC software (see the details in the
section).
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
section) and in the LDC software
Scaler Panel - Input Side (TX Mode) section);
TX HDMI Input 1 and 2 Ports section) and in the
FRC - Input Side (TX/TRX Modes)
HDMI Output Modes
The HDMI output ports of the transmitter are HDMI loop-back ports
and can be used as local HDMI outputs. The HDMI output 1 transmits
the signal of the HDMI input 1 port, the HDMI output 2 transmits the
signal of the HDMI input 2 port.
Fiber Optical Interface
After the Ethernet packetizing the two video streams are transmitted
to the remote endpoint device via the SFP+ / fiber optical ports.
Summary Tables
HDMI INPUTS
HDMI input 1
up to
Accepted signal
4K@60 4:4:4
 
Scaler
Frame rate converter
 
(FRC)
Color space
 
converter (CSC)
HDMI OUTPUTS
HDMI output 1
up to
Output signal
4K@60 4:4:4
Signal source HDMI in 1
35 35
HDMI input 2
up to
4K@60 4:4:4
-
 
 
HDMI output 2
up to
4K@60 4:4:4
HDMI in 2