Video Interface; Transmitter Mode; Receiver Mode - Lightware UBEX Series User Manual

 
     
4. UBEX Concept 4. UBEX Concept
4.3. Video Interface
4.3.1. Transmitter Mode
Port Diagram
The port diagram is valid for the following UBEX endpoint models:
▪ UBEX-PRO20-HDMI-F100
▪ UBEX-PRO20-HDMI-F110
▪ UBEX-PRO20-HDMI-R100 series
Video port diagram of the F100/F110/R100 transmitter
HDMI Input Modes
The transmitter can receive HDMI video streams from two HDMI 2.0
input ports. The signals can be up to 4K@60 Hz 4:4:4 in the case of
both inputs.
The video streams of the HDMI inputs can be processed in the video
processors. The processor of the HDMI in 1 has video scaler, frame rate
converter (FRC), and color space converter (CSC) functions. The processor
of the HDMI in 2 has frame rate converter and color space converter
functions.
The scaler, frame rate converter, and color space converter settings
are available in the LDC software (see the details in the
Port Properties Window or in the Stream Properties Panels
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
HDMI Output Modes
The HDMI output ports of the transmitter are HDMI loop-back ports
and can be used as local HDMI outputs. The HDMI output 1 transmits
the signal of the HDMI input 1 port, the HDMI output 2 transmits the
signal of the HDMI input 2 port.
Fiber Optical Interface
After the Ethernet packetizing the two video streams are transmitted
to the remote endpoint device via the fiber optical ports.
Summary Tables
Accepted signal
Scaler
Frame rate converter
(FRC)
Color space
converter (CSC)
Output signal
Signal source
Video Source
section).
HDMI INPUTS
HDMI input 1 HDMI input 2
up to up to
4K@60 4:4:4 4K@60 4:4:4
 
-
   
   
HDMI OUTPUTS
HDMI output 1 HDMI output 2
up to up to
4K@60 4:4:4 4K@60 4:4:4
HDMI in 1 HDMI in 2
4.3.2. Receiver Mode
Port Diagram
The port diagram is valid for the following UBEX endpoint models:
▪ UBEX-PRO20-HDMI-F100
▪ UBEX-PRO20-HDMI-F110
▪ UBEX-PRO20-HDMI-R100 series
Video port diagram of the F100/F110/R100 receiver
Fiber Optical Interface
The receiver can receive two HDMI video streams via the fiber optical
input ports.
HDMI Output Modes
The receiver can transmit HDMI video streams on two HDMI 2.0
output ports. The signal can be up to 4K@60 Hz 4:4:4 in the case of
both outputs. The streams received from the remote endpoint device
can be routed to any HDMI outputs of receiver, e.g. the stream from
the TX - HDMI in 1 can be switched to the RX - HDMI out 1 or 2, or both
ones either.
The streams can be processed by the video processors. The processor
of the HDMI out 1 has video scaler, frame rate converter (FRC), and color
space converter (CSC) functions. The processor of the HDMI out 2 has
frame rate converter and color space converter functions.
The scaler, frame rate converter, and color space converter settings are
available in the LDC software (see the details in the
Port Properties Window or in the HDMI Output Ports
44 44
Video Destination
section).