Mounting Options - Standalone Transmitters; High Rack Shelf; Under-Desk Double Mounting Kit - Lightware UMX-TPS-TX120 User Manual


  
3. Installation
3.1. Mounting Options - Standalone Transmitters
To mount the transmitter Lightware supplies optional accessories for different usage. There are two kinds
of mounting kits with similar fixing method. The device has two mounting holes with inner thread on the
bottom side; see the bottom view in the
please contact sales@lightware.com.
More details about the accessories and the mounting can be found in the

WARNING! Always use the supplied screws. Using different (e.g. longer) screws may damage the device.
INFO:
The transmitter is half-rack sized.
3.1.1. 1U High Rack Shelf
This accessory allows rack mounting for half-rack, quarter-rack and pocket sized units.
1U high rack shelf provides mounting holes for fastening two half-rack or four quarter-rack sized units.
Pocket sized devices can also be fastened on the self.

ATTENTION! Always use all the four screws for fixing the rack shelf ears to the rack rail. Choose properly
sized screws for mounting. Keep minimum two threads left after the nut screw.
Mechanical Drawings section. To order mounting accessories
Mounting Assembly
1U high rack shelf
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
3.1.2. Under-desk Double Mounting Kit
Guide.
The UD-kit double makes it easy to mount a single transmitter on any flat surface (e.g. furniture).

INFO: The chipboard screws are not supplied with the mounting kit.

Under-desk double mounting kit

25