Table of Contents
Advertisement
3. Installation
3.1. Mounting Options
WARNING!
For the correct ventilation and to avoid overheating ensure enough free space around the
appliance and do not cover it.
INFO:
In order to get the necessary mounting accessory please contact sales@lightware.com.
INFO:
More details about the accessories and the mounting can be found in the Mounting Assembly Guide
(https://lightware.com/pub/media/lightware/filedownloader/file/Assembly-Guide/Mounting_AG.pdf).
3.1.1. Rack Shelf Mounting
The 1U high rack shelf provides mounting holes for fastening four DP-OPT_150 extenders and put them into
a standard rack cabinet (width of the Rack shelf is 448 mm – without the ears). Fix the device to the Rack
shelf as shown in the figure:
3.1.2. UD-kit Mounting
Mounting with UD-kit (Under desk)
Mounting with UD-kit Double (Under Desk Double)
DP-OPT-TX150, DP-OPT-RX150 – User's Manual
3.2. Electrical Connections
3.2.1. Fiber Optical Connector
The extenders are assembled with standard SC receptacles.
3.2.2. DP Input and Output Ports
DP-OPT-TX150 and DP-OPT-RX150 provides DisplayPort connectors with Dual-mode support.
When a passive adapter is connected to the receiver, the source device is forced to switch to
DVI/HDMI mode.
3.2.3. USB Connectors
Standard USB connectors are built in the extenders supporting different features, but the pinout
of the connectors are the same.
3.3. Security slot
A Kensington-compatible security slot can be found on the side of
the units for theft protection. (Security cable is not supplied with
the extenders.)
Applied firmware package: v1.1.13 | LDC software: v2.5.1b5
12
Advertisement
Table of Contents
