Paritysetting; Operationmode; Querythecommandinjectionmode; Changethecommandinjectionmode - Lightware HDMI-TPS-RX110AY Series User Manual


  
7.LW3Programmers'Reference
7.9.5. Parity Setting
Command and Response
SET·/MEDIA/UART/<port>.Parity=<parity>
Î
pw·/MEDIA/UART/<port>.Parity=<parity>
Í
Parameters
Identifier Parameter description
<parity> Parity setting
Example
Î SET/MEDIA/UART/P1.Parity=0
Í pw/MEDIA/UART/P1.Parity=0
7.9.6. RS-232 Operation Mode
Command and Response
SET·/MEDIA/UART/<port>.Rs232Mode=<mode>
Î
pw·/MEDIA/UART/<port>.Rs232Mode=<mode>
Í
Parameters
Identifier Parameter description
<stopbits> Stopbits value
Example
Î SET/MEDIA/UART/P1.Rs232Mode=1
Í pw/MEDIA/UART/P1.Rs232Mode=1
Value Parameter value
0 None
1 Odd
2 Even
Value Parameter value
0 Pass-through
1 Control
2 Command injection
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
HDMI-TPS-RX110AY series – User's Manual
7.9.7. Query the Command Injection Mode
Command and Response
Î GET·/MEDIA/UART/<port>.CommandInjectionStatus
pr·/MEDIA/UART/<port>.CommandInjectionStatus=<logical_value>
Í
Parameters
Identifier Parameter description
Command injection mode
<logical_value>
Example
Î SET/MEDIA/UART/P1.CommandInjection=true
Í pw/MEDIA/UART/P1.CommandInjectionEnable=true
7.9.8. Change the Command Injection Mode
Command and Response
SET·/MEDIA/UART/<port>.CommandInjectionEnable=<logical_value>
Î
pw·/MEDIA/UART/<port>.CommandInjectionEnable=<logical_value>
Í
Parameters
Identifier Parameter description
Command injection mode
<logical_value>
Example
Î SET/MEDIA/UART/P1.CommandInjectionEnable=true
Í pw/MEDIA/UART/P1.CommandInjectionEnable=true
ATTENTION!
The local RS-232 and TPS serial link are mirrored. If you change the RS-232 mode on P1
(local) port, the P2 (TPS serial link) will also be changed.
Value Parameter value
true Command injection mode is enabled.
status
false Command injection mode is disabled.
Value Parameter value
true Command injection mode is enabled.
setting
false Command injection mode is disabled.
81