Adding Tags To The Port; Deleting Tags Of The Port; Deleting All Tags Of The Port; Query All Tags Of The Device - Lightware UBEX Series User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.17.5. Adding Tags to the Port
The following characters are allowed in the
numbers (0-9), and special characters ( - . _ ~ : / ? # [ ] @ ! $ & ( ) + = * ).
Command and Response
ç CALL•/MEDIA/CONTROL/ETHERNET/<port>:addTags(<tag>)
æ mO•/MEDIA/CONTROL/ETHERNET/<port>:addTags=
Example
ç CALL /MEDIA/CONTROL/ETHERNET/P102:addTags(laptop;1gbps)
æ mO /MEDIA/CONTROL/ETHERNET/P102:addTags=
9.17.6. Deleting Tags of the Port
Command and Response
ç CALL•/MEDIA/CONTROL/ETHERNET/<port>:removeTags(<tag>)
æ mO•/MEDIA/CONTROL/ETHERNET/<port>:removeTags=
Example
ç CALL /MEDIA/CONTROL/ETHERNET/P103:removeTags(macbook;meeting_room)
æ mO /MEDIA/CONTROL/ETHERNET/P103:removeTags=
9.17.7. Deleting All Tags of the Port
Command and Response
ç CALL•/MEDIA/CONTROL/ETHERNET/<port>:removeAllTags()
æ mO•/MEDIA/CONTROL/ETHERNET/<port>:removeAllTags=
Example
ç CALL /MEDIA/CONTROL/ETHERNET/P101:removeAllTags()
æ mO /MEDIA/CONTROL/ETHERNET/P101:removeAllTags=
9.17.8. Query All Tags of the Device
The query returns with all the tags which belongs to the device. One tag is always reserved for the MAC
address of the endpoint.
Command and Response
ç GET•/MEDIA/CONTROL/ETHERNET/<port>.DeviceTags
pr•/MEDIA/CONTROL/ETHERNET/<port>.DeviceTags=<tag>
æ
Example
ç GET /MEDIA/CONTROL/ETHERNET/P101.DeviceTags
æ pr /MEDIA/CONTROL/ETHERNET/P101.DeviceTags=Laptop;A8:D2:36:F0:00:35;TX_MeetingRoom;#2
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
<tag> parameter: non-capital letters (a-z), capital letters (A-Z),
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
9.18. Serial Port Configuration - MMU
INFO:
The serial port numbering can be found in the
9.18.1. BAUD Rate Setting
Command and Response
SET•/MANAGEMENT/CONTROL/SERIAL/<port>.Baudrate=<baudrate>
ç
pw•/MANAGEMENT/CONTROL/SERIAL/<port>.Baudrate=<baudrate>
æ
Parameters
Identifier
<number>
Example
ç SET /MANAGEMENT/CONTROL/SERIAL/P2.Baudrate=9600
æ pw /MANAGEMENT/CONTROL/SERIAL/P2.Baudrate=9600
#rs232 #rs-232 #serial
Control Port Numbering of the MMU
Parameter description Value
0 0
200 200
300 300
600 600
1200 1200
1800 1800
Baud rate value 2400 2400
4800 4800
9600 9600
19200 19200
38400 38400
57600 57600
115200 115200
142 142
section.
Explanation