Hdcp Setting (Input Port); Test Pattern Generator Mode; Test Pattern Color; Test Pattern Resolution - Lightware UMX-TPS-TX120 User Manual


  
7. LW3 Programmers' Reference
7.6.19. HDCP Setting (Input Port)
HDCP capability can be enabled/disabled on the input ports, thus, non-encrypted content can be seen on a
non-HDCP compliant display. See more information in the
Command and Response #hdcp
SET·/MEDIA/VIDEO/<in>.HdcpEnable=<logical_value>
ç
pw·/MEDIA/VIDEO/<in>.HdcpEnable=<logical_value>
æ
Parameters
Identifier Parameter description
HDCP enable/disable
<logical_value>
setting
Example
ç SET /MEDIA/VIDEO/I2.HdcpEnable=true
æ pw /MEDIA/VIDEO/I2.HdcpEnable=true

INFO: HDCP can be set for digital video inputs (I2, I3, I4) only. The function is unavailable on the analog
inputs (I1, I5).
7.6.20. Test Pattern Generator Mode
The output port can send a special image towards the sink device for testing purposes. The setting is
available on the input ports with the below-listed parameters.
Command and Response #testpattern #nosyncscreen
SET·/MEDIA/VIDEO/<in>.FreeRunMode=<mode>
ç
pw·/MEDIA/VIDEO/<in>.FreeRunMode=<mode>
æ
Parameters
Identifier Parameter description
Test pattern generator
<mode>
mode
Example
ç SET /MEDIA/VIDEO/I1.FreeRunMode=2
æ pw /MEDIA/VIDEO/I1.FreeRunMode=2
HDCP Management section.
Value Parameter value
true HDCP encryption is enabled.
false HDCP encryption is disabled.
Value Parameter value
Always off: the test pattern is not displayed on
0
the output.
Always on: the test pattern is displayed on the
1
output.
Auto: the test pattern is displayed if there is no
2
signal on the input port.
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
7.6.21. Test Pattern Color
Command and Response
SET·/MEDIA/VIDEO/<in>.FreeRunColor=<RGB_code>
ç
pw·/MEDIA/VIDEO/<in>.FreeRunColor=<RGB_code>
æ
Parameters
<RGB_code> RGB color in RR;GG;BB format (separated by semicolons).
Example
ç SET /MEDIA/VIDEO/I1.FreeRunColor=10;80;20
æ pw /MEDIA/VIDEO/I1.FreeRunColor=10;80;20
The test pattern color is on VGA input (I1) is set to green.
7.6.22. Test Pattern Resolution
Command and Response
SET·/MEDIA/VIDEO/<in>.FreeRunResolution=<resolution>
ç
pw·/MEDIA/VIDEO/<in>.FreeRunResolution=<resolution>
æ
Parameters
Identifier Parameter description
Applied resolution of the
<resolution>
test pattern generator
Example
ç SET /MEDIA/VIDEO/I2.FreeRunResolution=10
æ pw /MEDIA/VIDEO/I2.FreeRunResolution=10
Value Parameter value
0 640x480p60
1 720x480i60
2 720x480p60
3 720x576i50
4 720x576p50
5 800x600p60
6 1024x768p60
7 1280x720p60
8 1280x1024p60
9 1280x1080i60
10 1920x1080p60
11 1920x1200p60
109