Edid Management; Querying The Emulated Edids; Querying The Validity Of A Dynamic Edid; Querying The Preferred Resolution Of A User Edid - Lightware HDMI-TPS-TX210 User Manual

   
7.LW3Programmer'sReference
7.13. EDID Management
7.13.1. Querying the Emulated EDIDs
Command and Response #edid
 GET·/EDID.EdidStatus
 pr·/EDID.EdidStatus(<I1_state>;<I2_state>;...;<In_state>)
Parameters
TheresponserepresentstheemulatedEDIDontheinputportsgroupedbydestinations.Thestructureofthe
<I#_state>parametersisthesame:<Emulated_EDID_loc>:<source_port>
Identifier Parameterdescription
<Emulated_EDID_loc> The location of the emulated
EDID.
<source_port> The input port where the
above EDID is emulated.
Example
 GET/EDID.EdidStatus
 pr/EDID.EdidStatus=D1:E1;D1:E2;D1:E3;D1:E4
7.13.2. Querying the Validity of a Dynamic EDID
Command and Response
 GET·/EDID/D/<loc>.Valildity
pr·/EDID/D/<loc>.Validity=<EDID_val>

Parameters
Identifier Parameterdescription
<loc> The location of the EDID.
<EDID_val> ShowsifavalidEDIDis
storedinthegivenlocation.
Example
 GET/EDID/D/D1.Validity
 pr/EDID/D/D1.Validty=true
Parametervalues
D1-D#: dynamic EDIDs
U1-U#:UserEDIDs
F1-F#:FactoryEDIDs
SeetheEDIDMemoryStructure section.
E1-E#:Input(source)portlocation
SeetheWiringGuideforRS-232Data
Transmission section.
Parametervalues
D1-D#: dynamic EDID location
true:theEDIDisvalid
false:theEDIDisinvalid
Appliedfirmwarepackage:v1.2.0 | LDCsoftware:v2.2.0
HDMI-TPS-TX200series–User'sManual
7.13.3. Querying the Preferred Resolution of a User EDID
Command and Response
 GET·/EDID/U/<loc>.PreferredResolution
pr·/EDID/D/<loc>.PreferredResolution=<Resolution>

Example
 GET/EDID/U/U2.PreferredResolution
 pr/EDID/U/U2.PreferredResolution=1920x1080p60.00Hz
INFO:
UsetheManufacturer property to query the manufacturer and the MonitorName property to query the
name/typeofthemonitor.
7.13.4. Emulating an EDID on an Input Port
Command and Response
 CALL·/EDID:switch(<source>:<destination>)
 mO·/EDID:switch
Parameters
Identifier Parameterdescription
<source> Source EDID memory place:
Factory/User/Dynamic.
<destination> The emulated EDID memory
of the desired input port.
Example
 CALL/EDID:switch(F46:E2;F46:E3)
 mO/EDID:switch
7.13.5. Emulating an EDID to All Input Ports
Command and Response
 CALL·/EDID:switchAll(<source>)
 mO·/EDID:switchAll
Parameters
Seetheprevioussection.
Example
 CALL/EDID:switchAll(F49)
 mO/EDID:switchAll
Parametervalues
D1-D#: dynamic EDIDs
U1-U#:UserEDIDs
F1-F#:FactoryEDIDs
SeetheEDIDMemoryStructure section.
E1-E#:Input(source)portlocation
SeetheWiringGuideforRS-232Data
Transmission section.
91