Resolution Setting; Resolution Mode Setting; Scaler - Image Position Setting; Color Space Converter Setting - Lightware UBEX Series User Manual

Matrix application mode, av over ip multimedia extender
Table of Contents

Advertisement

 
 
9. Programmer's Reference
9. Programmer's Reference
9.8.10. Resolution Setting
The resolution which is set here will be enforced only if the ResolutionMode is set to Forced. See the details
about the Resolution Mode Setting in the next section.
Command and Response
SET•/MEDIA/STREAMS/VIDEO/<in>/STREAM.ResolutionSetting=<resolution>
ç
pw•/MEDIA/STREAMS/VIDEO/<in>/STREAM.ResolutionSetting=<resolution>
æ
Example
ç SET /MEDIA/STREAMS/VIDEO/S601/STREAM.ResolutionSetting=1600x1200p60
æ pw /MEDIA/STREAMS/VIDEO/S601/STREAM.ResolutionSetting=1600x1200p60

INFO:
The entire list of available resolutions can be find in the
9.8.11. Resolution Mode Setting
Command and Response
SET•/MEDIA/STREAMS/VIDEO/<in>/STREAM.ResolutionMode=<resolution_mode>
ç
pw•/MEDIA/STREAMS/VIDEO/<in>/STREAM.ResolutionMode=<resolution_mode>
æ
Parameters
Identifier
Parameter description
Resolution mode
<resolution_mode>
setting
Example
ç SET /MEDIA/STREAMS/VIDEO/S302/STREAM.ResolutionMode=Forced
æ pw /MEDIA/STREAMS/VIDEO/S302/STREAM.ResolutionMode=Forced
#scaler #frc #csc #colorspace
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual
UBEX series – Matrix Application Mode – User's Manual
Resolutions of the Scaler / FRC
section.
Value
Explanation
Pass-through mode - the original stream is
Pass
transmitted.
The device forces the resolution set in
Forced
the ResolutionSetting for the stream and
transmits it to the destination side.
9.8.12. Scaler - Image Position Setting
The resolution which is set here will be enforced only if the ResolutionMode is set to Forced. See the details
about the Resolution Mode Setting in the previous section.
ATTENTION!

The scaler settings are available for the stream of the HDMI input 1 port of the transmitter
only.
Command and Response
SET•/MEDIA/STREAMS/VIDEO/<in>/STREAM.ImagePosition=<image_position>
ç
pw•/MEDIA/STREAMS/VIDEO/<in>/STREAM.ImagePosition=<image_position>
æ
Parameters
The
<image_position>
can be set to Center, Stretch, or Fit.
Example
ç SET /MEDIA/STREAMS/VIDEO/S101/STREAM.ImagePosition=Stretch
æ pw /MEDIA/STREAMS/VIDEO/S101/STREAM.ImagePosition=Stretch
9.8.13. Color Space Converter Setting
Command and Response
SET•/MEDIA/STREAMS/VIDEO/<in>/STREAM.ColorSpaceSetting=<color_space>
ç
pw•/MEDIA/STREAMS/VIDEO/<in>/STREAM.ColorSpaceSetting=<color_space>
æ
Parameters
Identifier
Parameter description
<color_space>
Color space setting
Example
ç SET /MEDIA/STREAMS/VIDEO/S101/STREAM.ColorSpaceSetting=YCbCr 4:4:4
æ pw /MEDIA/STREAMS/VIDEO/S101/STREAM.ColorSpaceSetting=YCbCr 4:4:4
Value
Explanation
Pass-through mode - the original color
Pass
space of the stream is transmitted to the
sink device.
RGB
Forced RGB color space.
YCbCr 4:4:4
Forced YCbCr 4:4:4 color space.
YCbCr 4:2:2
Forced YCbCr 4:2:2 color space.
116
116

Advertisement

Table of Contents
loading

Table of Contents