Rebooting The Device; Restore The Factory Default Settings; System Commands - Endpoints; Set The Device Label - Lightware UBEX Series User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.4.10. Rebooting the Device
The Matrix Management Unit can be restarted – the current connections will be terminated.
INFO:
The video signal transmission is not affected by the rebooting of the MMU.
Command and Response #restart #reboot #reset
ç CALL•/SYS:reset()
æ mO•/SYS:reset=
Example
ç CALL /SYS:reset()
æ mO /SYS:reset=
9.4.11. Restore the Factory Default Settings
Command and Response #factory
ç CALL•/SYS:factoryDefaults()
æ mO•/SYS:factoryDefaults=
Example
ç CALL /SYS:factoryDefaults()
æ mO /SYS:factoryDefaults=
The device is restarted, current connections are terminated, and the default settings are restored. See the
complete list in the UBEX-MMU-X200 section.
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
9.5. System Commands - Endpoints
Parameters
Parameter
<UBEX_EP>
9.5.1. Set the Device Label
INFO:
The device label can be changed to a custom text in the LDC software. See the details about the
device renaming in the
for the Destination side.
The Device Label can be 64 characters long and ASCII characters are allowed. Longer names will be
truncated.
Command and Response
SET•/SYS/ENDPOINTS/<UBEX_EP>.DeviceLabel=<custom_name>
ç
pw•/SYS/ENDPOINTS/<UBEX_EP>.DeviceLabel=<custom_name>
æ
Example
ç SET /SYS/ENDPOINTS/UBEX0039A1.DeviceLabel=UBEX_RX_Theater
æ pw /SYS/ENDPOINTS/UBEX0039A1.DeviceLabel=UBEX_RX_Theater
9.5.2. Query the Product Name
ATTENTION!
The name of the product is a read-only parameter and cannot be modified.
Command and Response
ç GET•/SYS/ENDPOINTS/<UBEX_EP>.ProductName
pr•/SYS/ENDPOINTS/<UBEX_EP>.ProductName=<Product_name>
æ
Example
ç GET /SYS/ENDPOINTS/UBEX0039A1.ProductName
æ pr /SYS/ENDPOINTS/UBEX0039A1.ProductName=UBEX-PRO20-HDMI-F110
Description
UBEX endpoint ID UBEX<last_6_characters_of_the_MAC_address>
Device Information section for the source side and the
#label #devicelabel
108 108
Formula
Device Information section