Video Crosspoint Menu; Transmitter-Receiver Pair - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
6. Lightware Device Controller (LDC) 6. Lightware Device Controller (LDC)
6.4. Video Crosspoint Menu
6.4.1. Transmitter-Receiver Pair
6 5
7
8
9
q
The Concept
The Crosspoint menu displays the UBEX Transmitter (left side) and the Receiver (in the middle) connected to
each other. Clicking on a port or feature panel the Properties of the selected item appears on the right side.
Legend of the Video Crosspoint Menu
1 Device Discovery Clicking on the button results in returning to the Device Discovery window. The
connection with the current device will be terminated.
Main menu The available menu items (Crosspoint, EDID Management, Control, and Settings)
2
are displayed. The Terminal windows are available under the Settings menu.
3 Swap button Clicking on the button the orientation of the endpoint devices can be swapped.
The feature effects the GUI view only.
4 RX - HDMI out 1 Section of the HDMI out 1 port of the UBEX receiver. Available panels:
port
▪ Stream switcher: select the source signal for the output port; Stream #1
is the signal of the HDMI in 1 port, Stream #2 is the signal of the
HDMI in 2 port of the transmitter. See the tile legend in the
Switcher / Stream Tiles
▪ Scaler: settings of the scaler for the output port. See the details in the
Scaler Panel - Output Side (RX/TRX Modes)
HDMI out 1: the port properties of the HDMI out 1 port. See the details in
▪
the
4 3 2
q w
section.
section.
HDMI Output Ports (RX/TRX Modes) section.
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
Link aggregation
5
status indicator
6 Audio follows
1
video switcher
Layer tabs
7
8 TX - HDMI in 1
and local HDMI
out 1 ports
e
TX - HDMI in 2
9
and local HDMI
out 2 ports
SFP+ ports
q
RX - HDMI out 2
w
port
Stream
Properties
e
window
Indicates the current status of the SFP+ links. See the details about the icons
in the Link Aggregation Status Indicator section.
▪ Enabled: the audio stream follows the video stream when the video
crosspoint is changed. Beside of this the audio streams can be switched
separately from the video streams on the Audio crosspoint tab.
▪ Disabled: switching of a video stream does not effect the audio
crosspoint state.
The video and the audio crosspoint panel can be selected on the tabs.
Section of the HDMI in 1 / out 1 ports of the UBEX transmitter. Available panels:
▪ HDMI in 1: the port properties of the HDMI in 1 port. See the details in
the HDMI Input Ports (TX/TRX Modes) section.
▪ HDMI out 1: the port properties of the local HDMI out 1 port. See the
details in the Local HDMI Output Ports (TX/TRX Modes)
▪ Scaler: settings of the scaler for the output port. See the details in the
Scaler Panel - Input Side (TX Mode) section.
▪ Stream 1: the properties of the Stream #1. See the details in the
Properties Panels (TX/TRX Modes) section.
Section of the HDMI in 2 / out 2 ports of the UBEX transmitter. Available panels:
▪ HDMI in 2: the port properties of the HDMI in 2 port. See the details in
the HDMI Input Ports (TX/TRX Modes) section.
▪ HDMI out 2: the port properties of the local HDMI out 2 port. See the
details in the Local HDMI Output Ports (TX/TRX Modes)
▪ FRC: settings of the frame rate converter for the output port. See the
details in the FRC - Input Side (TX/TRX Modes)
▪ Stream 2: the properties of the Stream #2. See the details in the
Properties Panels (TX/TRX Modes) section.
Status information and parameters of the SFP+ Link 1 and 2.
Section of the HDMI out 2 port of the UBEX receiver. Available panels:
▪ Stream switcher: select the source signal for the output port; Stream #1
is the signal of the HDMI in 1 port, Stream #2 is the signal of the
HDMI in 2 port of the transmitter. See the tile legend in the
Switcher / Stream Tiles section.
▪ FRC: settings of the frame rate converter for the output port. See the
details in the FRC - Output Side (RX Mode)
▪ HDMI out 2: the port properties of the HDMI out 2 port. See the details in
the HDMI Output Ports (RX/TRX Modes) section.
Settings and status information of the selected panel are displayed in this
section. Clicking on the icon the properties section opens in new window.
57 57
section.
Stream
section.
section.
Stream
Stream
section.