Table of Contents
Advertisement
Chapter 1:
SelectIO Resources
IBUF_INTERMDISABLE
The IBUF_INTERMDISABLE primitive shown in
banks and is similar to the IBUF_IBUFDISABLE primitive in that it has a IBUFDISABLE
port that can be used to disable the input buffer during periods that the buffer is not being
used. The IBUF_INTERMDISABLE primitive also has an INTERMDISABLE port that can
be used to disable the optional uncalibrated split-termination feature. See
Split Termination in High-Range I/O Banks (IN_TERM)
feature.
X-Ref Target - Figure 1-17
The IBUF_INTERMDISABLE primitive can disable the input buffer and force the O output
to the fabric to a logic High when the USE_IBUFDISABLE attribute is set to TRUE and the
IBUFDISABLE signal is asserted High. If USE_IBUFDISABLE is set to FALSE, this input is
ignored and should be tied to ground. If the I/O is using the optional uncalibrated
split-termination feature (IN_TERM), those termination legs are disabled whenever the
driver is active (T is low). The IBUF_INTERMDISABLE primitive further allows the
termination legs to be disabled whenever the INTERMDISABLE signal is asserted High.
These features can be combined to reduce power whenever the input is idle. Input buffers
that use the VREF power rail (such as SSTL and HSTL) benefit the most from the
IBUFDISABLE signal being set to TRUE because they tend to have higher static power
consumption than the non-VREF standards such as LVCMOS and LVTTL.
IBUFDS and IBUFGDS
The usage and rules corresponding to the differential primitives are similar to the
single-ended SelectIO primitives. Differential SelectIO primitives have two pins to and
from the device pads to show the P and N channel pins in a differential pair. N channel
pins have a B suffix. The IBUFDS and IBUFGDS primitives are the same, IBUFGDS is used
when an differential input buffer is used as a clock input.
Figure 1-18
X-Ref Target - Figure 1-18
36
Send Feedback
INTERMDISABLE
IBUFDISABLE
Figure 1-17: Input Buffer With Input Buffer Disable and IN_TERM Disable
shows the differential input buffer primitive.
I
IB
Inputs from
device pads
Figure 1-18: Differential Input Buffer Primitives (IBUFDS/IBUFGDS)
www.xilinx.com
Figure 1-17
for more details about this
IBUF_INTERMDISABLE
I
(IBUF_INTERMDISABLE)
IBUFDS/IBUFGDS
+
O
Output to
FPGA
–
ug471_c1_21_041112
7 Series FPGAs SelectIO Resources User Guide
is available in the HR I/O
Uncalibrated
O
UG471_c1_64_041412
UG471 (v1.10) May 8, 2018
Advertisement
Table of Contents
