Time Adjustment; Figure 30: Setting The Time Adjustment; Table 33: Setting The Time Adjustment - WAGO -TO-PASS 761 Manual

WAGO-TO-PASS® 761
761-314 TO-PASS® Mobile, 4 AI
Pos : 34.31 /Serie 759 ( WAGO-Software)/T O-PASS Konfig urati onssoftware/Parametrier ung/Par ametrierung U hrzeitabgleich @ 3\mod_1223556752015_21.doc x @ 23747 @ 2 @ 1
7.8

Time Adjustment

Select the TO-PASS
Select the entry Acknowledgment under the option Time setting. The buttons
for various settings pertaining to time adjustment are located on the right side.

Figure 30: Setting the time adjustment

Table 33: Setting the time adjustment

Settings
Time adjustment
Pos : 34.32 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 2.0.0
®
telecontrol module from the project tree using the identifier.
®
The TO-PASS telecontrol module sends an SMS to itself and
receives the current time from the provider transmitted by
this SMS when the [SMS] button is clicked. Time
adjustment using an SMS takes place only once when the
®
TO-PASS telecontrol module is restarted, or when an SMS
with the text "Time" is received.
When the [Internet] button is clicked, the TO-PASS
telecontrol module takes the time from the response by the
Web portal on each transmission to the Web portal.
The transmission runtimes may cause time differences to
occur.
Parameterizing 69
®