Process Data" Page; Figure 13: "Process Data" Page; Table 37: Setting The Process Value - WAGO 750-563/040-000 Manual

48 Process Image
4.5.2.3

"Process Data" Page

Figure 13: "Process Data" Page

Information about the process data of the I/O module is displayed on the
Process Data page, e.g., output stage errors, supply or limiting value exceeded.
You can set the value via the Process Value field as follows:

Table 37: Setting the Process Value

Menu Item
Input Field
Buttons
[HEX]
[DEZ]
[Apply]
The display field offers the following diagnostic possibilities:
Manual
Version 1.3.0
750-563/040-000 2AO 0/4-20mA/ 6-18V DC/ 16Bit /XTR
Description
Input option for the process value
Displays the value in hexadecimal format.
Displays the value in decimal format.
Brings the value to the output.
WAGO-I/O-SYSTEM 750 XTR