Table of Contents
Advertisement
8 •
751-5701 [AS-Interface Module 4IN/4OUT 24V/2A Single]
View
2 AS-Interface Components
2.1 AS-Interface Module IP20
2.1.1 751-5701 [AS-Interface Module 4IN/4OUT 24V/2A Single]
Digital I/O-Module 4 IN / 4 OUT 24 V / 2 A Single
2.1.1.1 View
Status
AS-interface,
AUX supply
Fig. 2.1.1-1: View
2.1.1.2 Description
The AS-Interface module 751-5201 is an economical solution for a fieldbus-
independent and flexible connection of actuators and sensors from the field
and the control cabinet. The module is in accordance with AS-Interface
specification V.3.0.
The module works in standard address area and can be set to one of 31
addresses ranging from 1 ... 31.
The voltage for the sensors is supplied via the AS-Interface cable and is short
circuit protected.
The voltage for the actuators is supplied via the AUX black cable.
The AS-Interface module 751-5201 provides 4 digital 24 V inputs and 4
digital 24 V / 2 A outputs.
Sensors, actuators, AS-Interface power supply and actuator supply are
connected using connectors from the WAGO Multi Connection System Mini.
Sensor connectors
Error
FLT
ASI
I4
751-5701
4IN 24V-4OUT 24V 2A
S 7.F.E
AUX
O4 O3 O2 O1
X1
X2
AS-interface and
AUX connectors
Status
inputs
I3
I2
I1
Programming device
connector
NTERFACE
Status
outputs
X3
X4
Actuator connectors
AS-Interface Components IP20
gq57010e
WAGO-I/O-SYSTEM 751
Advertisement
Table of Contents
