8 •
AS-Interface Components
AS-Interface Module IP20
2 AS-Interface Components
2.1 AS-Interface Module IP20
2.1.1 751-5702 [AS-Interface Module 4IN/3OUT 24V/2A A/B]
Digital I/O-Module 4 IN / 3 OUT 24 V / 2 A A/B
2.1.1.1 View
Status
AS-interface,
AUX supply
Fig. 2.1.1-1: View
2.1.1.2 Description
The AS-Interface module 751-5202 is an economical solution for a fieldbus-
independent and flexible connection of actuators and sensors from the field
and the control cabinet. The module is in accordance with AS-Interface
specification V.3.0.
The module works in extended address area and can be set to one of 62
addresses ranging from 1A ... 31A resp. 1B ... 31B.
The voltage for the sensors is supplied via the AS-Interface cable and is short
circuit protected.
The voltage for the actuators is supplied via the AUX black cable.
The AS-Interface module 751-5202 provides 4 digital 24 V inputs and 3
digital 24 V / 2 A outputs.
Sensors, actuators, AS-Interface power supply and actuator supply are
connected using connectors from the WAGO Multi Connection System Mini.
Sensor connectors
Error
FLT
ASI
I4
751-5702
4IN 24V-3OUT 24V 2A
S 7.A.E
AUX
X1
X2
AS-interface and
AUX connectors
Status
inputs
I3
I2
I1
Programming device
connector
NTERFACE
O3 O2 O1
Status
outputs
X3
X4
Actuator connectors
AS-Interface Components IP20
gq57020e
WAGO-I/O-SYSTEM 751