General Services; Connection Object; Connection Manager Object; Tcp/Ip Interface Object - WAGO 2789-9023 Manual

Communication modules
Table of Contents

Advertisement

Fieldbus Description

4.2.2.2 General Services

This object supports the following common services.
Service Code
0x0E
0x10

4.2.3 Connection Object

Because the connections are established and terminated via the Connection Manager,
the class and instance attributes of this object (class 0x05) are not visible.

4.2.4 Connection Manager Object

The Connection Manager object (Class 0x06) provides the internal resources required for
the input and output data and explicit messages. In addition, this object is responsible for
managing these resources. For each connection (input and output data or explicit data),
another instance of the Connection class is created. The connection parameters are ex-
tracted from the "Forward Open" service, which is responsible for establishing a connec-
tion.
The following services are supported for the first instance: Forward_Open, Uncon-
nected_Send and Forward_Close.
No class and instance attributes are visible.

4.2.5 TCP/IP Interface Object

The TCP/IP Interface object (Class 0xF5) provides for the configuration of the TCP/IP
network interface. Examples of configurable objects include the IP address, the network
mask and the gateway address of the product.
The underlying physical communication interface linked to the TCP/IP interface object
can be any interface supported by the TCP/IP protocol. Examples of components that
can be linked to a TCP/IP interface object include the following: an Ethernet 802.3 inter-
face, an ATM (Asynchronous Transfer Mode) interface or a serial interface for protocols
such as PPP (Point-to-Point Protocol). The TCP/IP Interface object provides an attribute,
which is identified by the link-specific object for the connected physical communication in-
terface. The link-specific object should typically provide link-specific counters, as well as
any link-specific configuration attributes.
Each device must support exactly one instance of the TCP/IP Interface object for each
TCP/IP-compatible communication interface.

4.2.5.1 Instances

Attribute
ID
1
2
26
Product manual | Version: 1.0.0
EtherNet/IP Communication Module
Service Available
Class
Instance
Yes
Yes
No
Yes
Access
Name
Get
Revision
Get
Max Instance
Service Name
Description
Get_Attribute_All
Returns the content of all attributes
Get_Attribute_Single
Returns the content of the respec-
tive attribute
Table 21: TCP/IP Interface Object – Instance 0
Data type
Description
UINT16
Version of this object
UINT16
Maximum number of instances
2789-9023
Table 20: Common Services
Factory setting
4
1

Advertisement

Table of Contents
loading

Table of Contents