Table of Contents
Advertisement
8 •
751-4001 [AS-Interface Module 4OUT 24V/2A Single]
View
2 AS-Interface Components
2.1 AS-Interface Module IP67
2.1.1 751-4001 [AS-Interface Module 4OUT 24V/2A Single]
Digital I/O-Module 4 OUT 24 V / 2 A Single
2.1.1.1 View
Status
outputs
Error
Status
AS-interface,
AUX supply
Fig. 2.1.1-1: View
2.1.1.2 Description
The AS-Interface module 751-4001 is an economical solution for a fieldbus-
independent and flexible connection of actuators from the field and the control
cabinet. The module is in accordance with AS-Interface specification V.3.0.
The module works in standard address area and can be set to one of 31
addresses ranging from 1 ... 31.
The voltage for the sensors is supplied via the AS-Interface cable and is short
circuit protected.
The voltage for the actuators is supplied via the AUX black cable.
The AS-Interface module 751-4001 provides 4 digital 24 V / 2 A outputs.
The actuators are connected using M12x1 round plugs. The AS-Interface
cable and the AUX cable can be connected directly.
LEDs indicate the status of outputs, the AS-Interface and actuator supply as
well as a short circuit or overload condition.
3
4
OUT 3
OUT 4
1
2
OUT 1
OUT 2
FID/FAULT
IR
751-4001
PGM
AUX
ASI
NTERFACE
Actuator connectors
AS-interface flat cable
AUX supply flat cable
Programming device
connector
WAGO-I/O-SYSTEM 751
AS-Interface Components IP67
gq40010e
Advertisement
Table of Contents
