Table of Contents
Advertisement
8 •
751-3001 [AS-Interface Module 4IN 24V Single]
View
2 AS-Interface Components
2.1 AS-Interface Module IP67
2.1.1 751-3001 [AS-Interface Module 4IN 24V Single]
Digital I/O-Module 4 IN 24 V Single
2.1.1.1 View
Status
inputs
Error
Status
AS-interface
Fig. 2.1.1-1: View
2.1.1.2 Description
The AS-Interface module 751-3001 is an economical solution for a fieldbus-
independent and flexible connection of actuators and sensors from the field
and the control cabinet. The module is in accordance with AS-Interface
specification V.3.0.
The module works in standard address area and can be set to one of 31
addresses ranging from 1 ... 31.
The voltage for the sensors is supplied via the AS-Interface cable and is short
circuit protected.
The AS-Interface module 751-3001 provides 4 digital 24 V inputs.
The sensors are connected using M12x1 round plugs. The AS-Interface cable
can be connected directly.
LEDs indicate the status of inputs and outputs, the AS-Interface and actuator
supply as well as a short circuit or overload condition.
3
4
IN 3
IN 4
1
2
IN 1
IN 2
FID/FAULT
IR
751-3001
PGM
ASI
NTERFACE
Sensor connectors
AS-interface flat cable
Programming device
connector
WAGO-I/O-SYSTEM 751
AS-Interface Components IP67
gq30010e
Advertisement
Table of Contents
