Figure 4-22: Removing The Cutout; Figure 4-23: Bundling The Line Cord - NEC Xen alpha Installation Manual

Installation Manual, Chapter 4 – Installing Dterm Series i Multiline Terminals
November 2003, A6-506000-642-01(8508), Release 6.0
10.1.2 Wall Mounting the Telephone
1. Raise and remove the base cover from the telephone. Refer to
Section 9 Removing or Installing the Base Plate on a Multiline
Terminal.
2. Remove cutout shown in Figure 4-22: Removing the Cutout with
nippers.

Figure 4-22: Removing the Cutout

3. Plug line cord in the wall receptacle. Leave about 8 inches of cord
and bundle the rest as shown in Figure 4-23: Bundling the Line
Cord.

Figure 4-23: Bundling the Line Cord

101