Register 65; Register 66 - NEC 28i System Manual

1201 - DCI Setup
Telephone Programming Instructions
To enter data for Program 1201 (DCI Setup):
1. Enter the programming mode.
2. 1201 + HOLD.
Type No?
3. Enter the DCI sub-type you want to program (1-10) + HOLD
You assign DCI software ports to sub-types in Program
1202.
Item No?
4. Enter 1 to select the DCI S-Registers + HOLD
Register No?
5. Enter the number of the register you want to program (65 or 66) +
HOLD
6. Enter data for the register you select + HOLD
Registers 65 and 66 require you to enter more than one field
of data. You see the following prompt after entering data for a
register's last field.
Register No?
7. Repeat from step 5 to program another register.
OR
HOLD + Repeat from step 4 to select another register type.
OR
HOLD + HOLD to repeat from step 3 and select another DCI
sub-type.
OR
HOLD three times to exit.
3-30