Setting Object (Class Id: 371 Hex) - Omron K6CM User Manual

8 Monitoring and Setting Using the EtherNet/IP Devices
8-3-4

Setting Object (Class ID: 371 hex)

This object sets up the K6CM device itself and sets up measurement and alarm.
Service Code
Service code
02 hex
10 hex
01 hex
0E hex
*1. The attributes to be written are attribute IDs 64 to 78 hex. Be sure to set "0" to the attribute IDs: 64 hex and 65
hex. When you perform various resets, set with Set_Attribute_Single. Set the functions implemented by the
version upgrade of attribute ID A0 hex or later by Set_Attribute_Single.
*2. Attribute IDs 64 to 78 hex are read.
Functions implemented by upgrading such as A0 hex of attribute ID can not be read by Get_Attributes_All,
but can be read by Get_Attribute_Single.
The data size is 42 bytes for Get_Attributes_All.
Class ID
Specify 371 hex.
Instance ID
Specify 01 hex.
Attribute ID
 Common to K6CM
Attri- Parameter
bute ID name
64 hex Software reset Restarts the K6CM device. It is used to validate the
65 hex Max./min.
reset
66 hex Display value
type
8 - 18
Service name
Set_Attributes_All
Write values to all attributes.
Set_Attribute_Single Write the value of the speci-
fied attribute.
Get_Attributes_All Reads the values of all attri-
butes.
Get _Attribute_Single Reads the value of the speci-
fied attribute.
Description
setting after changing the setting value.
Rising from 0 to 1: Execute (software reset)
Initializes the Max./min. value.
OFF to ON: Execute (initialize max. and min.
value)
Sets which measurement value is displayed in the
7 segment display on the front of the K6CM device.
0: PV (Present value)
1: MIN
2: MAX
Description
Not supported.
*1
Not supported.
Not supported.
Not supported.
*1
K6CM Motor Condition Monitoring Device User's Manual (N219)
Supported services
Classes Instances
Supported.
Supported.
Supported.
Supported.
Data
Attri-
Data
bute
Default value
type
Write UINT 0000 hex
Write UINT 0000 hex
Write UINT 0000 hex
*2