6 How to Use the Motor condition monitoring Tool
6-1
Screens
Select [All Programs] | [OMRON] | [Motor condition monitoring tool].
Or double-click the shortcut icon (
The software tool starts and the following screen is displayed. This screen is called "start screen".
6-1-1
Start Screen
The overall screen transition from the start screen of the software tool is as follows.
Select the menu in the following order and use it.
The menu startup order
(1) [Device setting]
(2) [[K6CM] Create project]
(3) [[K6CM] Open the project file]
(3)Device setting
Start SYSMAC Gateway Console.
Configure communications service and network port. (For details, refer to 6-2 Setting of K6CM Devices
on page 6-19.)
6 - 2
) of the software tool on the desktop.
Communications driver between computer and K6CM Driver Launch the SYSMAC
Gateway Console screen for setting the status of SYSMAC Gateway.
Perform initial setting (IP address setting, parameter setting) and automatic project
creation for the device.
Open the project that you created and saved in step 2) above.
K6CM Motor Condition Monitoring Device User's Manual (N219)
Contents