Detection Setting - Omron STC-FDR-SW01 User Manual

6-3-5. Detection Setting

For detection condition settings in motion detection and master image detection, detailed
detection settings can be configured here.
Detection setting window is shown when [Detection] button in Advanced setting window is
clicked.
①
②
③
No.
１ Display area
２ all
(Checkbox)
３ Number
４ Event occurrence
confirmation
(Checkbox)
④
⑤
⑥
Items
Camera image is shown here if "Motion detection" is
selected in the event signal settings. Master image is
shown here if "Master image comparison" is selected.
All configured area are displayed in the image if this is
checked.
Currently configured area is indicated with red lines,
and others are with gray lines.
Only selected No. area is displayed with red lines if this
is not checked.
Selects area No. to configure.
Only numbers set in number of detection positions set
in Advanced setting window can be selected.
If this is checked, current camera image is shown as
live image. This enables confirmation of event
occurrence status based on detection area, detection
difference value, and difference area rate.
See "[2] Confirming event occurrence" for details.
⑦
Description
⑧
28