Appendices
A-6 Internal Data of K6CM Devices
This section describes the overview of the internal data of the K6CM devices.
The K6CM device has setting values and present values (i.e., measurement value and alarm results)
as internal data.
You can write or read these setting values and present values (PV) in the following way.
Method
Motor condition moni-
toring Tool (Software
tool)
CIP message commu-
nications
Tag data link
Modbus TCP message
communications
For details of internal data, refer to A-7 Setting Values on page A-15 and A-8 Present Values on page
A-21 below.
A - 14
Internal data of K6CM
Setting value
Writable, readable
(Note. depending on the
item)
Writable, readable
Can not write
Writable, readable
K6CM Motor Condition Monitoring Device User's Manual (N219)
Present value
Readable
(Note. depending on the
item)
Readable
Readable
Readable
Reference
Section 6 How to Use the
Motor condition monitoring
Tool
7-3 Motor Monitoring Using
Software Tools on page 7-9
8-3 Monitoring and Setting
Using the CIP Message Com-
munications and Examples of
Communications Instructions
on page 8-12
8-2 Monitoring Using the Tag
Data Link on page 8-5
Section 9 Monitoring and Set-
ting Using the Modbus TCP
Devices