Omron K6CM User Manual page 99

Installing the Software Tool
This section shows the procedure for installing a new software tool.
Precautions for Correct Use
"User account control" may be displayed depending on computer settings during installation
procedure. In that case, click "yes" if there is no problem.
1
Insert the attached CD in the computer and select "setup.exe" from the autoplay screen.
If automatic playback was not done, double-click the "setup.exe" file under the CD drive.
The following [Select language setting] Dialog Box will be displayed.
Precautions for Correct Use
If the following message is displayed, the old version of CX-Compolet/SYSMAC Gateway has
already been installed on the computer. In order to use software tool, upgrade of CX-Compo-
let/SYSMAC Gateway is necessary.
Please read "3.5. Upgrade installation" of "CX-Compolet_SGW_InstallationGuide_E.pdf" in the
Manual folder on the CD and uninstall the CX-Compolet/SYSMAC Gateway after backing up the
data. Then re-perform step 1.
K6CM Motor Condition Monitoring Device User's Manual (N219)
4 Introduction of the Motor condition monitoring Tool
4
4 - 17