Omron K6CM User Manual page 30

1 Overview
1-2-3 Features of Vibration & Temperature Type
• Simultaneous monitoring of motor vibration (i.e., acceleration and velocity) and motor temperature
are possible.
• Mainly bearing wears can be detected by the acceleration.
• Mainly load imbalance and misalignment can be detected by the velocity.
• The acceleration and velocity alarm threshold values of K6CM-VBM vibration & temperature type can
be set automatically with the software tool (software tool version 1.3.0.0 or later).
1-2-4 Features of Insulation Resistance Type
• Insulation resistance can be monitored.
• Resistance leakage current (I0r) can be measured. (*1)
• Capacitive leakage current (I0c) can also be measured. (*2)
*1. Alarm output cannot be performed.
*2. Can be read via EtherNet/IP or Modbus TCP. Unit display and alarm output cannot be performed.
1-2-5 Features of Software Tool
• Software tool "Motor condition monitoring Tool" that is provided with the K6CM device enables K6CM
device setup and simple status monitoring.
• It enables reading of measurement values at specified intervals and automatic data storage (with the
CSV format).
• The acceleration and velocity threshold values can be set automatically (software tool version 1.3.0.0
or later).
1 - 6
K6CM Motor Condition Monitoring Device User's Manual (N219)