Status Of Alarm Bar, Status Indication, And Transistor Output For Each Status - Omron K6CM User Manual

2-2-3 Status of Alarm Bar, Status Indication, and Transistor Output for
Each Status
Status
Monitoring Not yet
Compre-
hensive
alarm:
normal
Compre-
During hensive
monitoring alarm:
Warning
Compre-
hensive
alarm:
Critical
After monitoring
(only when using the
trigger function)
When the self-diagno-
sis error occurs
When the power is OFF
*1. This is the case when the transistor output type is set to Normally Close. In the case of Normally Open,
ON/OFF is opposite to the above.
K6CM Motor Condition Monitoring Device User's Manual (N219)
Description
Monitoring is not completed until
the measurement value is set
after the power is turned ON.
All measurement values are in
normal condition.
There is no "Critical" in the mea-
surement value, and even one of
them has "Warning".
There is "Critical" in at least one
measurement value.
When using the trigger function
(external trigger or internal trig-
ger), the monitoring is completed.
Self-diagnosis error is occurring
regardless of monitoring status.
----
2 Device Components
Alarm Status Transistor
bar display output 1
Not lit. Not lit. OFF
Green "MON"
*1
ON
Yellow
*1
OFF
Red
*1
OFF
The sta- Not lit. The sta-
tus at the tus at the
end is end is
kept. kept.
Not lit. "ERR" OFF
Not lit. Not lit. OFF
Transistor Transistor
output 2 output 3
OFF ON
ON
*1
ON
2
ON
*1
ON
ON
*1
OFF
The sta- ON
tus at the
end is
kept.
OFF OFF
OFF OFF
2 - 9