Omron K6CM User Manual page 154

6 How to Use the Motor condition monitoring Tool
3) Open the [K6CM] project file
Open existing project file.
The project consists of the following.
• Project file: This file defines the connection configuration of the K6CM.
• Setting file: This is a file for backing up and saving device setting values.
• Log file: The log of the monitoring result is saved.
Precautions for Correct Use
Be sure to select [Device setting] before selecting [[K6CM] Create project].
If you select [[K6CM] Create project] before selecting [Device setting], click the [Cancel] Button
and close the screen. Click the [Cancel] Button and do not save the project, please exit. Then
start the software tool again.
6 - 4
Select the project file and click [Open].
Monitoring screen with project
saved starts.
K6CM Motor Condition Monitoring Device User's Manual (N219)